Skip to content

Available 24/7 Emergency Gate Repair Service

Shield Gate Repair

Service

Automatic Gate Installation in Dallas–Fort Worth

A gate installed properly runs for twenty years. A gate installed badly becomes somebody's repeat repair call. The difference is almost entirely in the groundwork nobody sees.

What your gate is doing, and what it usually means

Most gate faults announce themselves in a fairly specific way. Find yours below — it will tell you roughly what you are dealing with before anyone arrives.

What you’re seeingUsually means
Replacing a gate that keeps failingWorth checking the posts and footings before spending on a new gate
Automating an existing manual gateGate weight and hinge condition determine which operator is viable
New build or new drivewayBest time to run conduit and set footings properly
Upgrading to access controlOperator and access system need to be specified together

How we diagnose it

  1. Site assessment — soil, slope, drainage, power availability, gate weight

  2. Specify the operator to the gate and the duty cycle, not to a price point

  3. Set footings to depth for North Texas clay

  4. Run conduit and power properly the first time

  5. Install safety devices to current standards

  6. Full commissioning, programming and handover

Watch the actual repair

Real gate installation jobs

Photographs from our own job archive — real equipment, real repairs.

  • A newly installed automatic driveway gate closed across a residential entrance
  • Concrete footings poured and set for new gate posts before the gate is hung
  • A pair of metal driveway gates hung on new posts, partly open
  • A horizontal-slat wood and steel driveway gate closed across a paved entrance
  • Conduit run into a gate post ready for the operator power and safety wiring
  • An installer levelling a gate leaf on its hinges during installation
  • A slide gate track set into a driveway ahead of gate installation
  • A completed sliding driveway gate in its fully open position
  • A new gate operator mounted and wired on its concrete pad
  • An ornamental iron driveway gate installed between masonry pillars
  • A keypad and call box mounted on a post at a new gate entrance
  • A double swing gate installed at a residential driveway, viewed from the street
  • Safety photo-eyes installed either side of a new gate opening
  • A finished automatic gate installation with the operator and control enclosure in place
  • A welded steel gate frame being fitted before infill panels are added
  • A newly installed cantilever gate at a commercial yard entrance
  • A completed driveway gate with its access control keypad installed at driver height

Gate Installation questions

Why does gate installation cost more than I expected?

Because most of the cost is not the gate. It is the footings, the trenching, the conduit, the power run, the safety devices and the commissioning. Skipping any of it is how you end up with a gate that needs repairing every year. For reference, published figures in the Dallas market put a residential automatic opener installation somewhere in the $2,500–$7,500 range depending on site conditions.

Can you automate the gate I already have?

Often yes. It depends on the gate's weight, the condition of the hinges and posts, and whether power can reach the location sensibly. We assess all three before quoting.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives.

Call NowText UsEstimate