Skip to content
Shield Gate Repair

Tarrant County

Gate Repair in Kennedale, TX — Same-Day Service

Kennedale is small, sits between Arlington and Fort Worth on Business 287, and carries a great deal more open outdoor storage than a city its size would suggest — yards holding plant, materials and vehicles rather than buildings. That changes what a gate is for.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

Gate repair in Kennedale

Kennedale is small, sits between Arlington and Fort Worth on Business 287, and carries a great deal more open outdoor storage than a city its size would suggest — yards holding plant, materials and vehicles rather than buildings. That changes what a gate is for.

On a site where the value is spread across the land rather than locked inside a building, the perimeter is the security, and the gate is the single point in a very long fence line that has to be both usable every day and sound every night. It also means the gate is often the only thing anyone would need to defeat, and it sits on ground that was never surfaced for it.

We specify heavier here than the size of the business might imply, because a rolling gate dragged across unmade ground on a long run is doing a harder job than the same gate on a paved commercial forecourt.

Areas we cover in Kennedale

  • Steeplechase Estates
  • Shady Creek
  • Oakhill Park
  • Village Creek
  • Brookstone Estates

Zip codes served

  • 76060

Getting to you

We usually run in via US-287, Kennedale Parkway, Little School Road, Dick Price Road.

We run 24 hours a day, seven days a week. You get a real arrival window when you call, and a message when the technician is on the way.

Local landmarks near our Kennedale calls: Village Creek · Kennedale Town Center · Sonora Park · Business 287 corridor

Gate services we provide in Kennedale

Operator brands and models we repair in Kennedale

The operators marked “seen here” are the ones that turn up most often in Kennedale. Every brand links to what we repair on it, and to the individual models we are called out to most.

ArlingtonFort WorthAzleBedfordBenbrookColleyvilleCrowleyKennedale
Coverage schematic — shows which nearby cities we serve, not exact distances or boundaries.

We cover Kennedale and the rest of Tarrant County

Kennedale is one of 26 Tarrant County cities we service. Our technicians work across the whole Dallas–Fort Worth Metroplex, so a call from Kennedale goes to the same team, with the same parts on the truck, as a call from Dallas.

Also serving nearby

Customer testimonials

Real Customers. Real Repairs. Watch Our Customers Tell Their Stories.

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team and the same parts stock to Kennedale.

Our technicians, on our own jobs

Every photograph on this site is our own work. None of it is stock, and none of it is generated.

  • A newly installed automatic driveway gate closed across a residential entrance
  • Concrete footings poured and set for new gate posts before the gate is hung
  • A pair of metal driveway gates hung on new posts, partly open
  • A horizontal-slat wood and steel driveway gate closed across a paved entrance
  • Conduit run into a gate post ready for the operator power and safety wiring
  • An installer levelling a gate leaf on its hinges during installation

Operators we repair

Gate Operator Brands We Repair

We fix the operators nobody else wants to touch. Most gate companies replace the whole operator because diagnosing it is harder than selling you a new one. We repair control boards, limit switches, hydraulic pumps and gearboxes on all of these — and every tile below is a photograph of that manufacturer’s equipment, not a logo.

We also service:

Real work

Watch Us Actually Do the Work

Not stock footage. Not a slideshow. Real Shield technicians repairing real gates across Dallas–Fort Worth — LiftMaster board swaps, FAAC hydraulic work, Ramset operator replacements, emergency call-outs.

Every other gate company in this market shows you a stock photo of a gate. We’ll show you the repair.

FAAC Gate Operator Repair — Hydraulic ServiceVideo page
All-O-Matic Slide Operator — Drive and Clutch ServiceVideo page
Ramset Slide Gate — Worn Rollers Destroying the DriveVideo page
Moisture-Corroded LiftMaster Board and an Undersized Solar ArrayVideo page
Emergency Gate Repair — Same-Day Call-OutVideo page
Iron Gate Repair — Weld Repair on a Cracked FrameVideo page

Kennedale gate repair questions

Our yard gate is the only security we have. What should we be fitting?

Something specified for the job rather than for the budget. On a perimeter where the gate is the single control point, that usually means a heavier rolling or cantilever gate, a positive lock rather than relying on the operator to hold it, and proper ground preparation under the run. It costs more once and it is the difference between a deterrent and an inconvenience.

The ground under our gate is not surfaced and it keeps binding. Is that fixable?

Yes, and the ground is usually the fix rather than the gate. A rolling gate needs a consistent surface under its run, and on unmade yard ground that surface moves with the weather. Getting the run right — a proper track bed or a cantilever design with no ground contact at all — ends a problem that no amount of adjustment will.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate